Remove #1 spark plug
Remove valve cover
Manually rotate engine with a socket on the crankshaft until #1 piston is at the top of its stroke and #1 intake valve is open - this is TDC
It is computer controled and not adjustable.
This information can be found in the owner's manual. This information can be found in the owner's manual.
The airbag computer has detected a malfunction and set a code.
you will need a c-clamp and screwdriver and ratchett set.
The computer detected a malfunction, set a code, and went into limp mode.
Which engine?? Buy a service manual from your local parts store and line up the marks.
If it is a three speed transmission, there is an internal failure. If a four speed the computer has detected a malfunction and set a code.
unhook - side of the battery and let set 5 mins and reconnect and the light will go out.
Top dead center on an engine is defined as when the piston is farthest from the crankshaft. Bottom dead center is when the piston is closest to the crankshaft on the engine.
If you are changing the timing belt you need to get a shop manual on your car from a parts store. It will show you how and have pictures.
If the clock/radio is anything like the one on the '93 Plymouth Voyager, here is how you set the clock: First turn on the radio, then press the set button. When it shows the "P" hit the select button, and it should change to just hours. Turn the Tuner knob to forward or back to set the time you want. Hit the Select button again to go to minutes, and do the same thing with the Tuner knob. Hitting the select button a third time will save the clock settings. ..
set it at top dead center the computer does the rest