0
If the clock/radio is anything like the one on the '93 Plymouth Voyager, here is how you set the clock:
First turn on the radio, then press the set button. When it shows the "P" hit the select button, and it should change to just hours. Turn the Tuner knob to forward or back to set the time you want. Hit the Select button again to go to minutes, and do the same thing with the Tuner knob. Hitting the select button a third time will save the clock settings. ..
What else can I help you with?
How do you set the clock in a 1990 Plymouth Voyager?
This information can be found in the owner's manual. This information can be found in the owner's manual.
How do you set the timing in a 1993 Plymouth Voyager van?
It is computer controled and not adjustable.
How do you set the clock in a 1992 Plymouth Voyager?
Believe it or not, you need to have a casette in the casette player. If you use the casette that cam with the car, it has audible instructions. Now, here's one for you- where is the fuse for the overhead console that protects the compass and drive time features?
How do you set the clock on a 1993 Plymouth sundance?
To set the clock on a 1993 Plymouth Sundance, first, ensure the ignition is in the "Run" position. Locate the clock setting buttons on the dashboard; typically, there are two buttons labeled "HR" (hour) and "MIN" (minute). Press the "HR" button to set the hour and the "MIN" button to set the minutes until the correct time is displayed. Once set, the clock will retain the time even when the ignition is off.
Setting the clock on a 1994 Plymouth acclaim?
To set the clock on a 1994 Plymouth Acclaim, first locate the clock adjustment buttons on the dashboard, typically near the radio. Press the "Hour" button to set the hour, and the "Minute" button to set the minutes. Make sure to adjust the time correctly, paying attention to AM and PM. Once set, the clock should keep the time until it needs adjustment again.
Why is the airbag light staying on in a 1999 Plymouth Grand Voyager se?
The airbag computer has detected a malfunction and set a code.
How do you set the clock in a 1998 Plymouth Voyager?
there is 2 very small black buttons right above where the time is displayed. The one on the left is hour and the one on the right is minute. you have to us something with a small tip to change time like a pen head.
Tools needed toinstall front brake pads on 1991 Plymouth voyager van?
you will need a c-clamp and screwdriver and ratchett set.
How do you set the clock on a 1992 Plymouth acclaim?
To set the clock on a 1992 Plymouth Acclaim, first, locate the clock dial or buttons on the dashboard. Turn the dial or press the "H" (hour) and "M" (minute) buttons to adjust the time to your desired setting. Once the correct time is displayed, release the buttons. If your model has a digital display, ensure the time is correct by checking it after a short while.
Why does 98 Plymouth voyager get stuck in 2nd gear?
If it is a three speed transmission, there is an internal failure. If a four speed the computer has detected a malfunction and set a code.
What is the correct way to set the timing belt for a 98 Plymouth Voyager?
Which engine?? Buy a service manual from your local parts store and line up the marks.
How do you reset the service engine soon light in a 1989 Plymouth voyager?
unhook - side of the battery and let set 5 mins and reconnect and the light will go out.
