Disconnect the pin switches on the front of the door opening, you may be able to hold them in with a piece of tape, but it won't last long.
The other option is to switch the light to off, if that is an option.
Check to see what position the light switch is in first
No. Common practice after removing doors.
remove fuse-Look in manual for which one
Unscrew the locking nuts off the hinges and lift them off. You'll have to disable your dome lights by either removing the fuse, or getting some clips to hold the switches in. Take off the bolts on the door hindges and lift of the material strap on the inside. You will have to work the door back and forth and upwards to get it out of the hinges
They are inside the doors, and are available from most part stores.
Most Jeep Wranglers have a door light cutoff fuse. Look in the fuse box and read the labels. You should just be able to remove the fuse to kill the lights if you have removed the doors.
how do you remove the doors from a 2004 jeep wrangler
Check all the door and light switches, they are turned on by twisting the light switch to the left, also the pin switches on the doors will activate the cabin lights.
remove the battery btw, your mom.
Fuse number 4 disconnects the doors switch from turning on the interior lights
WEll, I don,t own a Jeep (but I would love to). Common sense tells me that there is no insulation inside the cab (roof,doors etc::). Hope this helps.
Your Electronic Ignition Switch is bad. It is located on the inside of the jeep under your steering column.