answersLogoWhite

0

If you can't figure out how just by looking you really shouldn't be doing it. Trust me on this one, okay?

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Murray MTD loses power when it is running Powers up and down?

This is usually a carb problem. It is not getting enough fuel fast enough. Try spraying the carb out with carb spray. Take the little float bowl out and let the spray run through it. This way you can spray the bottom out also. If this doesnt help then you will have to take the carb off and clean it really good. Use carb spray and some copressed air for best results. Good luck.


Where do you spray carburetor cleaner for Honda CRX si?

the crx si is fuel injected so you can spray carb cleaner where ever you want. but it wont be cleaning the carb


Is it OK to spray carb cleaner in the carbs of your motorcycle to clean them out while it is running?

Carb cleaner doesn't really clean anything when you spray it down the throat of the carburater. The parts that need cleaning are the jets and internal lines. The only way to truly clean those parts is to remove the carbuater, disassemble it and clean the parts. Some carb cleaners can make a little difference if you run them through the tank, but spraying down the throat only gets a little surface carbon off, if that. -------------------------- The main reason to spray OTMAN carb cleaner at a carb while the bike is running to check for a vacuum leak. If you hear any change in the engine noise when you spray carb cleaner at the joint between the carb and the head, then you've got a vacuum leak. Get a new carb-to-head gasket.


How do you use carb cleaner?

Remove the air filter, and while the engine is running spray the cleaner into the carb directly, being careful not to stall.


Why does your 1987 Toyota 22r bog down when you give it gas?

It could be a mixture of a couple of things. First could be an intake leak, or a vacuum hose leak. To check for these, get a can of Carb and Choke cleaner, and spray the vacuum lines as well as the intake system. If the motor revs up while you spray the lines, you would have a leak. The other reason for this could be a carborator issue. I recommend removing the carb, cleaning all ports and jets out with carb cleaner, and if mechanically inclined enough, do a full rebuild on the carb. Hope this helps.


How do you check vacuum system on 1989 camaro?

Are you checking for a vacuum leak? What I do is start the engine and use a can of carb cleaner and spray it around the engine. Spray it around the hoses, mating surfaces, base of carb or fuel injection and around sensors. If the engine rpm increases in an area start to narrow down in that location. Check for broken hoses or bad gaskets.


How do you on a carburetor on a riding lawn mower?

There are a few ways to clean a small engine carb. One is the simple way of applying the coke to the carb and spray a small amount of carb cleaner to the carb. Number two is to take the carb off and take it apart and buy a rebuild kit and rebuild the carb.


How do you clean a carburetor on a murry riding lawn mower?

There are a few ways to clean a small engine carb. One is the simple way of applying the coke to the carb and spray a small amount of carb cleaner to the carb. Number two is to take the carb off and take it apart and buy a rebuild kit and rebuild the carb.


305 runs at low idle but cuts out depressing accelarator appears to be ignition problem?

you did not say if was carb but if so spray pump in the carb is a good place to start


How do fix gas coming out threw the air filter Can I spray air cleaner in the carb?

You need to rebuild that carb, there should never be that much fuel coming out of the jets.


How do you fix a sticky carb on your 93 mark VIIIOne is sticking?

Spray the throttle body (carb) with cleaner, not carb cleaner. You should use throttle body cleaner because there is a coating on the throttle body that will be removed if you use carb cleaner and that coating that comes from the factory should not be removed.


What is MVW and HVW in water spray system?

MVW: Medium Velocity Water spray system HVW: High Velocity Water spray system