Speak to Citroen, quote VIN, model and registration and they will give advice. Like me, they would need to be satisfied that it's your vehicle
try 3523, it worked on my radio.
You need to start the car and then disconnect the immobilizer while its running, if its the same as mine the buttons for the immobilizer will be beneath the ashtray? The plastic thing that the buttons are on lifts up and you can disconnect it from underneath by removing the plug. If your having problems with the code for the immobilizer try disconnecting the battery then re connecting it and it should reset the immobilizer code to either 0000 or 1111, start the car then disconnect the immobilizer as above.
The key is faulty or the immobilizer will not accept the code. remove the battery for 30 mins to allow the system to reset.
You'll have to contact the dealer.
You can get a code to unlock the start-up for a Citroen Xantia V6 Aut 1997 in the vehicle's official owner's guide. You can also check with the manufacturer to see if the code is available.
you cant, you need to go to the dealership and they will give you new code
1. Turn the ignition on, to where you would normally enter the code. 2. enter the code as usual, not touching the key. 3. press the "c" button once. 4. enter the new code. 5. press the "c" button again, this will be confirmed by 4 beeps.
1. Turn the ignition on, to where you would normally enter the code. 2. enter the code as usual, not touching the key. 3. press the "c" button once. 4. enter the new code. 5. press the "c" button again, this will be confirmed by 4 beeps.
how
press the button code
insert the red key into the ignition barrel. watch the immobilizer light go out. remove red key. put in the key that you want to code, straight away. wait a few seconds. remove key. immobilizer light comes on. insert the key that you have just coded. immobilizer light should go out. start engine.
Whether a radio code for Citroen C3 is removed then replaced is needed depends on the car. Some will require a manufacturers code.