you unlock the lock collar at the top and take all the wait off the back suspension then just adjust the lower ring thebn tighten the lock collar back down
How do u change 400ex rear brakes?
depends if the sprocket is bigger or smaller than a stock sprocket.
It could be your shock or structs(shocks) It could be your shock or structs(shocks) It could be your shock or structs(shocks)
It isn't repairable ... it is a sealed unit and needs to be replaced.
Use the half moon key, sold at Honda dealers for $5. Place on the holes that are drilled at the bottom of the chrome shock. Adjust to the lowest number.
yes honda hasnt changed the crf250 design from 2004 to 2010
The rear shocks from the Honda XR100R are interchangeable from the '01, '02 and '03 models. However, unless you happen to have one of these older shocks lying around, it would probably be cheaper to get an after-market 140mm shock. OEM parts are expensive!
Inside your rear door, are 2 "Stay Assemblies" or "Shock Absorbers". One or both have lost the charge of hydraulic fluid. You need to replace your defective stay assembly. They are available at your Honda dealer for about $50 each.
yes at the bottom turn it clockwise to stiffen
run a smaller sprocket on the rear
The maximum speed would be only fifty five on all major highways because that is the legal speed limit.
160 psi of nitrogen in the rear shock.