Buy a turbo. Change exaust , change manifold , change air intake, reprogram ecu.
Yes but it is not worth it. The engines face opposite ways.
Yes you can you will need to get the non-turbo engine, non-t ECU and wire harness. The wire harness and ecu are diffrent between the t and the non t.
The simple answer is yes. there are two engines in talons, lasers and eclipses. or better known as dsm's. (diamond star motors). there is the 4g63, and the 420a. which both come in turbo and non-turbo models. if you are looking to swap a turbo 4g63 into a non turbo 4g63 shell, the swap is simple. same as if your swapping a turbo 420a into a non turbo 420a shell. now, if your looking to swap a turbo 4g63into a nonturbo 420a or vise versa, you will encounter problems with motor mounts, wiring etc. keep in mind the wiring and ecu's etc will be different on each motor.
Yes, you can, but there is a chance that you will need to change transmission and everything what is going inside the engine. The problem is that Mitsubishi engine parts from different engines are not compatible (it can be turbo Japanese engine, or non-turbo crysler engine and so on).
There was a stock turbo option for the 93 eclipse. there was also a non-turbo (n/a) option.
yes. both engines are the 4g63. the turbo engines from the 1990-1994 is a 6 bolt 4g63 and the turbo engine from the 1995-1999 is a 7 bolt 4g63.
the manifold will boltup but you need to get a new jpipe and oil/water lines, you can find all that in a kit on ebat fyi
It depends on what year model eclipse u have is it the turbo or non turbo model
For the right price you can put a turbo on just about anything. Unfortunately for you the cost to put a turbo on a non-turbo eclipse is probably more than going out and buying an eclipse with a turbo already on it.
This depends on if the eclipse is automatic or manual and also if it is the turbo model or the non-turbo model.
turbo or non turbo?
intake ports are differnt non-turbo only one vac port for the fuel reg.