Want this question answered?
to change the celsius on display to Fahrenheit, u want to press the econ button on your climatronic, then right after press your auto button right above the econ button, at this time the display should switch to Fahrenheit or Fahrenheit to celcius whichever u prefer....hopes this helps..
Press and hold the recirculation button. Then press the temperature up ("+") button to switch between degrees Celsius & Fahrenheit on the Climate Control Temperature and Instrument Panel Outside Temperature displays.
The answer depends on what equipment has your multi-function display. I suggest you refer to the user manual.
The C stands for Celsius, the metric equivalent of Fahrenheit, which is the temperature scale used in the US. In my 2001 Blazer, the compass/temp display is part of the overhead. Next to the display, there are two push-buttons. One turns the display on and off, and the other toggles between Celsius and Fahrenheit. Just hit that button and it should go away. Hope this helps you out. -Rex
Start with the thermometer in off mode. Hold the smiley face down and wait. The thermometer display will scans through multiple functions. The first display will be C*, you want to continue holding the smiley face until the display shows F*and then let go. This will change the setting from Celsius to Fahrenheit.
Hope this helps. On 1999 model beetle, with key on push and hold in hour and minute buttons at same time this will change your temp from Celsius to Fahrenheit.
sounds like you have it set for Celsius not Fahrenheit.
With the unit in the off mode, depress the on/off switch and hold in until the "c" in the display switches to an "f." It will now measure in Fahrenheit.
Press and hold the "Refrigerator" and "Freezer" buttons simultaneously for 5 seconds.
Leave it off and then hold down start button until c flashes up on the display
This varies from one car to another. At the risk of sounding flip, the first place to check is your owner's manual.
For a Meijer K1-8120 from Bestmed. Turn on the thermometer... when display pops up, press the button again. The units should now be in Fahrenheit . Hope this helps.