0
1. Jack up the front end, and place it on jack stands. Always place it on jack stands.
2. Remove the lug nuts using a breaker bar/impact wrench
3. Pull the rim off the wheel studs
To put it back on-
1. Align the wheel studs with the holes in the rim
2. Lift and place the rim on the wheel studs
3. Put the lug nuts back on and turn 2-3 times
4. Tighten using a torque stick/ torque wrech in a star pattern
5. Place jack under it and remove jackstands
6. Lower
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you replace the starter on a 1998 Monte Carlo z34?
Remove the positive cable from your 1998 Monte Carlo battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
How do you remove the front seats in a 2002 Monte Carlo?
There are bolts that you must remove in order to take out the front seats of a 2002 Monte Carlo. There are two in the back of the seat and two in the front of the seat. If you have heated seats you will also have to remove the wires for that before you take the seat out.
How do you take out the light rheostat on a 95 Monte Carlo?
How do you take a rheostat out of a 2003 monte carlo
How do you get the thermostat out in a 1998 Monte Carlo?
you have to remove the throttle body and use 13mm rench to take the thermostat housing bolts off
What type of freon does your 04 Monte Carlo take?
R134a
How much transmission Fluid does an SS Monte Carlo hold?
how much automatic transmission fluid does a 2004 monte carlo ss take on a full flush
Do you need special tools to remove the crankshaft damper pulley on a 1998 Monte Carlo?
you just need a puller to take it off, it's not a special puller.
What kind of oil does a 2000 Monte Carlo take?
5W-30
What type of ac refrigerant does a 1995 Monte Carlo take?
134A
Can you take the catalytic converter off a 1985 Monte Carlo?
Not legally.
Can you take a catalytic converter off a 1985 monte carlo?
Not legally.
How long does it take to replace a front hubwheel bearing on a 2001 Monte Carlo?
Replacing one side, labor only, 1 to 1 1/2 hours.
