I am looking for a bonnet lock plate and bonnet hingers for 1966 f350
What do you show off your Easter bonnet on
On the bonnet, slide the Ford oval and insert the ignition key into the lock located there
you can take off the subsidy lock by entering cunsidy codes into it.. you can get this codes from Classicunlocking.com
Hi,I assume that the bonnet is the same as the Connect and Focus?If it is, there is a lock on the bonnet/hood. Either behind the badge or the flip up panel
There is a keyhole hidden behind the Ford logo in the grille Take the transit door key come to the front of the van and look at grill under the bonnet their you will find a place where this key can be inserted and turn this realises the lock and the bonnet will pop open.
take a sledge hammer to the bonnet
lock smith . take hinges off the door or take the door knob and plates off the door
jack the car up and remove the fan unit then you can get your hand up to where the lock is located and you should be able to push the little catch on the left hand side of the lock this will then open your bonnet i had to do this the other day
get a pair of long nose pliers, to the left of the bonnet lock (as you look at it) is the bonney cable, insert the pliers through the grill to get hold of the cable and push it to your right, towards the lock and the bonnet should pop. the just release the catch and it should open.
Insert ignition key into front grille just beneath the bonnet turn anti clockwise to release bonnet and turn clockwise to release safety catch and lift bonnet
the Ford badge on the front of the bonnet lifts up to reveal the bonnet release lock. Use the ignition key and turn to position 1, lift the bonnet, then turn to position 2 to fully release