It's relatively easy to do. Just unhook the wheel, brake assy, caliper and bracket assy, and unhook the axle nut. Then the hub assy can be unbolted and may need a chisel or air chisel to remove.
what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer
2002 blazer want take gas
It is simple. The blade arm slides straight off of the assembly where it pivots. No clips to trip or press. Just take a flat blade screwdriver and pry straight off. The new assembly pops right down on the small pivot shaft
drop tank take pump assembly out of tank,unplug wires and repeat in reverse for install
The 1983-1994 Chevrolet Blazer S-10 (sometimes called "Compact Blazer") takes 16" replacement windshield wiper blades on both sides front. The 1989-1994 models also take a 14" rear wiper blade.
take it to a Chevy place
take it to a good mechanic
With a wrench...... :-)
take it to get fix
You take it to an auto shop and have them do it
If all goes well the job should take about an hour with proper tools and equipment. Keep in mind that if the hub/bearing assembly is rusted in, it could take longer.
losen the bolts off the top of the alternator so that it moves then take the botom one off.and losen the belt and take off the wires and your good to go