Run into the back of another vehicle on the road... at a low speed because there is less damage that way and you can re-use the bumper. lol... there is some plastic nuts inside the archers of the wheels and a nut holding the archers
take out the old ones put in new ones
you take the front bumper off 13 screws and its done do the other bulbs at the same time
You will have to take it to the agent to enable the rear CH.
u need to drop d bumper by unscewing the scews beside front weels this will alow u to take out d light
pull of thehorn cover then take of the nut and the steering wheel should pull off easy?
remove laguna bumper
take it off and put the new bumper on replacing all screws nuts and bolts from the first bumper
The temp sensor is under the front bumper area on the right hand side about half way between the right edge of radiator and the inside of the right hand side front wheel arch. you might have to take down the wheel arch mud guard to find it.
how do I take apart the front suspension for the jounce bumper
Yes, the entire front bumper cover will need removed.
the air bag module is fitted under the centre console behind the gear stick, you have to take out the console to get to it cheers telboy.
First remove the bumper cover. You need to take off the front grill to get at the plastic retainers that hold the top of the buimber on. There are about four retainers on the bootom of the bumper.