Want this question answered?
To change a CV Axle on a 1998 Mercury Villager, take off the front tire and the caliper assembly. Take off the pad and the rotor. Disconnect the steering knuckle and pull the CV axle off. Replace with new and reinstall the parts.
Take the break off. ======================================================== I was looking at the ( 1998 ) Mercury Tracer Owner Guide and it shows : Move the rear tires to the front of the vehicle ( staying on the same side ) and take the two front tires and put them on the opposite sides of the rear
How to take the door panel off a 2002 mercury mountaineer?
if it is a 2.5 v6 than take the passenger front tire off and the alternator is right behind the plastic shroud
Front wheels off the ground (tow truck or dolly) parking brake off
passenger side bottom back of the engine. to get at it you need to lift the car, remove the front passenger wheel, and take off the splash guards
how to take cover off 1979 mercury boat motor
I done it myself two months ago. First you take off the screws from the inside of the hood and take off the screws to the lights. remove the lights to take off the front top portion of the bumper and then under wheel wells there are 3-4 screws and under the front of the car there are about 12 screws. It helps to keep the screws lined up in the order you took them off so you'll remember how to get it back on. it took me a few hours but I did it myself!
you have to take out the power steering pump and move it to side and to get the belt off you need to remove front right (passenger) tire
how to take the door panel off of a 1997 mercury marquis
The front wiper arms on a 1997 Mercury Villager clip off once they are bent backwards. To install the new wipers simply slide them into the clip.
take it off