Want this question answered?
You first have to purchase the correct light bulb for your Peugeot 207. The next step is to remove the bolt that is holding the light bulb cover in place. Then, remove the light bulb cover. finally, replace the bulb.
The plastic cover will pop off. Then remove bulb.
Look in the trunk, there is cover for the brake light, remove and you will have access to change the bulb.
How do you remove the brake light cover on a ford focus
To change the license plate light on a Pontiac Sunfire, first remove the cover over the bulb with a small screwdriver. Gently push on the bulb and turn 1/4 turn to remove the old bulb. Insert the new bulb and snap in the cover.
To replace the dome light in your 2005 Toyota, you will need a flat screwdriver to remove the screws and pry the dome light cover from the light. You can then access the light to change the bulb or replace the entire bulb and cover.
Pry open the cover and replace with replacement bulb.
get a new light bulb ,take the cover off the light bulb that's broken and replace it.
Pop the cover off by pulling at the corners away from the window, pull the tabs on the light shield, and replace the bulb with a 912 light bulb.
Open the hood, get to the back of the light, remove the rubber cover and the light is visible. Turn the light bulb housing and pull the bulb out. Installing is the reverse.
To replace the bulb for the interior light of a car, one should remove the lens cover, remove the burnt out bulb, inspect the socket for dirt or corrosion, inspect the lens cover for damage, check for loose wires then install the new bulb and replace the cover.
The brake light bald can be accessed through the trunk of the car. Remove the rear tail light cover to access the brake light bulb.