0
What else can I help you with?
How do you take off the valve cover on a 1987 Camry?
pull the spark plug wires out from the valve cover and unscrew the four nuts it will come right off.
How do you remove the valve cover gasket?
Take the valve cover off and scrap the gasket off with a razor. Be carful not to put any gouges in the on either side.
Should you need to replace the valve gasket when you replace the timing belt on a 2000 Hyundai Elantra?
you should only change the gasket if you have to take the valve cover off....... you should only change the gasket if you have to take the valve cover off.......
How do you change a valve cover gasket for a 1995 altima?
Take off the valve cover. there is about 8 to 12 bolts. just take it off and take off the old gasket, then clean off old gasket residue with a razor knife, then install the new one and put the cover back on. the bolts dont need to be extremely tight.
How do you install the valve cover gasket on a 1988 Cadillac DeVille?
take off valve cover throw away old gasket replace old gasket with new put valve cover back on pwn
Where are the head bolts located prelude?
Your head bolts are located under your valve cover. Take your valve cover off and you will see them. Hope this info. helped.
Does the 2002 Chevrolet Silverado 5.3L engine have a PCV valve?
look om the passengers back side of the valve cover. You need to take off the vortec cover.
How do you replace valve cover gaskets on 97 grand am?
take off your valve covers and peel off the gasket you may have to scrape it off with a screwdriver but it wont hurt anything
How do you remove broken oil cap?
Take the valve cover off and run a couple of screw drivers through it and twist it out. Or just break it out of there. Most importantly take the valve cover off a lot easier and no chance of dropping plastic in the motor.
Where to put oil in dodge dart?
take the oil cap off on the valve cover and pour in.
How do you change the valve cover gasket on a 1990 Toyota Cressida with a straight 6-cylinder engine?
if it's a 5s-fe engine(most of the time it dosent matter what kind of engine) then take a 30 mm socket to the top of spark plug wholes and take those off(there should be two rings when you take that top ring off) then all ya do is take any hoses off the valve cover, pull the valve cover, then take a razor blade to the gasket. once you have the valve cover gasket nice and clean you just put a new one on.
How do you change a valve cover gasket on a 1999 Daewoo Leganza?
take off the valve cover put on new gasket then put cover back on you if you cant figure it out you should be hit in the head with a tact hammer.
