The seat is bolted down at all four corners on a bucket. You can find the bolts easily enough by just checking under the carpet where the seat steel frame goes to the floor. It appears that you need a special wrench but you can use a five point socket to fit it. Good luck. Also be careful and don't forget to unhook the electrical pluss beneath the seat.
YES, It will bolt right in.
Replace the lock
285 horse
replace the elec. motors on the seat
It unbolts from the inside of the door, so, you have to pu;ll the little inside panel. It just pops out.
1973 Chevy pu wireing diagram
5w30
sure it will fit, as long as they are the same type, th350 or th400. also 2wd 0r 4wd.
yes it will as long as u get some 255/30/22 tire it will fit no mods to your suspension
Yes, people do it all of the time. As long as the width of the seat fits in the cab the way you like it (they usually do) then the only other thing to worry about is the holes in the floor for mounting. You will have to put the new seat in, mark where the bolt holes need to be, pull the seat back out and drill the holes. I have a 1963 Chevy and a 1965 Chevy. I bought 1997 Pontiac Bonneville seats for the 65 and I am looking to put seats out of a 2003 or so Chevy pickup in the 1963. That would give me leather, shoulder strap seat belt, and a console.
R134a
The 93 used a electronic / computor controlled transmission and the 91 did not. The 91 chevy trucks transmission wireing harness and computor is all together DIFFERENT. WON'T WORK.