get a bunch of tools and a bunch of time start pullin and unscrewing, get a haynes manual from the zone , you can really mess this up if you not careful, some things have to be taken off in a certain order
What are you trying to get to that you need to take apart the dash?
It is behind the radio but you have to take the whole dash out or you may can get to it if you take the oval shaped cover off(look to the left) above the passenger airbag it will be on a metal bracket. you can slide it off.
trust me that is not a job you want to take on. take it to a mechanic. you have to pull the dash out
The fender on this truck is a simple bolt on part. Remove the screws that hold it on and unplug any wiring harnesses and it should come right off.
take radio out and look to left of radio
removal or replacement of airbag is a specialist job.take it to a mechanic
take the truck to your local ford dealer. they can hook up their scan tool and read the code.
under the dash, above the radio. take out speedometer module to get to it
R134a
Ok, not exactly sure what you're referring to and depending on the year, but if you mean switching back to 2H from 4X4, stop the truck, place it in neutral, change the switch on your dash from 4H or 4L to 2H. You should hear an audible click, or clunk and your idiot light should go out. Put the truck in drive and drive on.
take door panel off 1995 gmc truck.
Under the hood on the truck will be a label that lists how many ounces the truck requires. You can then compare to the amount in one can to decide how many to use.