take out all pannels and about 30 screws, took me 2 hours., remove air vents and remove screws, also glove box and screws.
The radio in a 2002 Buick Century is changed by removing the bezel, disconnecting the wiring harness, and removing the retaining screws. It can then be pulled from its mounts and a new radio installed.
You do not have to take the dash out. There are screws that you can access in order to take the radio out.
You must have the original radio, and through radio may change the time on citroen car !
To change the radio in an Isuzu Amigo, first remove the bezel from around the radio. Then, release the side clips from the radio itself and pull it out of the dashboard. Remove the wiring from the back of the radio and add this to the new radio. Reverse the process to install the new radio.
i have the same problem with my 1996 buick regal . i think it could be related to the long antenna lead , coming from the top of the rear quarter panel , all of the way to the dashboard . i tried to find a "trimmer" , to adjust , on the radio , but was unsuccessful .
1995 Buick LeSabre how do i reset my radio
Press "SET" and then use the keys on the bottom right of the radio.
In order to remove the radio unit, you need to unbolt the radio. The bolts are concealed by the dashboard's trim panels.
with the radio off use the seek buton to set the time
To replace the radio in the 98 buick you take off the trim and fascia from the dash. This means removing about 4 to 6 screws. After all this there is some wires on the back of the fascia that you need to unhook. These are held in with clips. the radio itself has four screws. Once you take these out the radio should just pull out. I'm going off of my 98 buick lesabre in which i put in a full system.
Remove the complete dashboard. This is NOT an easy thing to do! It is back there in the center behind the radio and passenger airbag.
There is no way to disable the theftlock really. You can google it, and find out the password for your radio, and then change your battery, and then enter the code.