If stain is from rust, try using lemon juice from a lemon and leave it out in sun. Reapply if needed, don't add water. Wash as usual when stain is gone.
Is the water rusty color? Or is the rust color on the pool finish - plaster or vinyl or fiberglass?
When the fabric stores receive the fabric on the bolt, the fabric is wrapped right side in. To show the true color and texture of the fabric the employees must take the fabric and drape it over the bolt.
yellow
You must take into account the type of fabric, the color, and the temperature of the water
Butterbream is a very, very light yellow color. Start with white paint and add very small amounts of yellow at a time. You can always add more, but you can't take the yellow paint back out.
Pouring about a cup of salt in the washing machine along with the dye helps to set the color. Allow the agitator to mix the color in the hot water thoroughly and the salt to dissolve before adding your fabric. Rinse the fabric twice (or until water is clear) in cold water. Cold water also helps to set the color and rinse out any color that didn't "take". Rinsing will also prevent bleeding when in the future the fabric needs to be washed. Good luck.
I think you get green yellow? BUT the best way to find out is to take green paint and yellow paint and mix it together try it out.
First, the leave grows into a light green color, Then to a dark green, Then to a yellow or orange color, Then to a brown color
If you talking about the scrim or large piece of fabric, they usually change the color using lights focused on the cloth. If the cloth is white, it'll take on the color of the light.
Its a special blend and its yellow dont put any other color
Copper doesn't rust
Because the siding is yellow and the trim is white. The best color for a house like this would be a basic grey color. The color is natural and it want take away from the house nor trim around the window.