well first of if you see the wear and tear on it then you should get a new 1 but if its warped or wobbles just alittle its not good also if and this is major if it isn't spinning freely without a belt on it then its no good its alwaays supposed to spin free
Loosen the tensioner pulley on your 2001 Chevy Impala. The serpentine belt will become loose. Take the old belt off and put the new belt on. Tighten the new serpentine belt with the tensioner pulley.
below the alternator. there is a diagram on the engine above the serpentine belt
You can change the serpentine belt by loosening the tensioner pulley. When the tensioner pulley is loose and the serpentine belt will become loose. Put the new serpentine belt on and tighten the tensioner pulley.
Put the serpentine belt around the pulleys on your 2001 Chrysler LHS. Tighten the serpentine belt by pushing the tensioner pulley to the left. Tighten down the tensioner pulley and the serpentine belt will be tight.
Put the serpentine belt on to the pulleys of your 1994 Chevy engine. Tighten a serpentine belt with the tensioner pulley.
how do i lossen the belt tensioner on a 2001 Hyundai Sante fe to replace the serpentine belt
Put the new serpentine belt on to your 1992 Chevy Corsica pulleys. Push the tensioner pulley to the left to tighten the serpentine belt.
If it is a serpentine belt you replace the tensioner pulley
usually serpentine belts get their tension(tightness) from the belt tensioner
how to release serpentine belt tensioner on 1991 C1500 Chevy Silverado?
There is no adjustment on the spring / Tensioner. You either have the wrong belt are the tensioner itself is bad. Replace tensioner are belt.
just a ratchet to fit onto the tensioner. crank the tensioner counter clockwise and it'll slack the belt.
Remove serpentine belt. Remove alternator. The bolts that hold the tensioner on are under the alternator.
YOU DONT IT HAS A AUTO BELT TENSIONER
if it is a belt squeal, check and replace the serpentine belt and or the tensioner.
You can't. it has an automatic self adjusting belt tensioner on it.
No you can not, It is kept tight by a spring loaded belt tensioner with a smooth pulley on it. Probley needs a belt tensioner on it.
It has a serpentine belt and has a self adjusting tensioner.
The 2001 Honda Civic is not equipped with a serpentine belt, but has 2 v-belts. These are tensioned through use of a tensioner.
Begin by loosening the tensioner pulley on your 2000 VW. The serpentine belt will become loose when the tensioner pulley is loose. Remove the old serpentine belt and put the new serpentine belt on. Tighten the new serpentine belt with the tensioner pulley.
Put a wrench on the tensioner. Push it slack. Replace the belt while holding the tensioner in the slack position.
That I know of, there is NO serpentine belt, unless you are talking about the the Timing Belt (hardly serpentine, but anyway), it has a belt tensioner, not automatic, though.
You can remove your serpentine belt by loosening the tensioner pulley. Pushed the tensioner pulley to the right and the serpentine belt can be easily removed.
There is no way to adjust the belt tensioner, if it's not keeping enough tension on the belt the complete tensioner itself will need replaced.
Loosen the tensioner pulley. Slide the tensioner pulley to the right. The serpentine belt will come loose. Remove the serpentine belt. Reverse the process to install the new serpentine belt.