Symptoms are loss of coolant with no apparently leak. White smoke from the exhaust, especially at start up. Oil level Overfull. A white foamy substance on the underside of the oil fill cap. Engine overheating. Air bubbles escaping from radiator with cap all.
Remove the intake manifold retaining bolts from your 1993 Mercedes-Benz manifold. Remove the old manifold gasket. Clean the surface and put the new gasket on.
There is no filter:)
Where and how do you change the fuse for the dash bord lighting sytem in the 1993 190e 2.3l
For a 190E 1984 Model, it is about 60Litres, this is 13 Gallons(UK) or 16 Gallons(US). For a 190E 1993 Model it should be the same +/- 5Litres.
The car company that produced the 190E model is Mercedes-Benz. This model was produced by Mercedes-Benz from 1982 through 1988 and again from 1991 through 1993.
my 1993 190E 2.3 is doing the same thing. just replace the switches...they tend to not last
There is no such thing as a 1998 190E, BTW - It was replaced by the C-class in 1993... On my Mercedes (1984) there is no cap lock, when you lock or unlock the doors, the gas latch (door) is locked or unlocked automatically.
By using a tool box open the location and remove it to replace it with a new one
sounds like a blown head gasket.
By this I assume you mean the amount of oil that will fill the engine to the maximum oil guage level when the engine is empty. For the 190E 2.6 it is between 6 and 7 lts (1.5gallons)
Yes - at the left rear forward of the rear axle under a black plastic cover.
have a mechanic sheck for a blown head gasket or a craked head