answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How do you test a nitrate hot surface igniter?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What color does lithium nitrate burn?

The color of lithium in the flame test is red.


Is sodium nitrate soluble in hot or cold water?

Yes.


Will a baseboard hot water gas fired furnace work during a power outage?

no you need power to run the board and the igniter


How do you fix an igniter on a mosquito magnet?

1) Take the top cover off of the mosquito magnet 2) On the Liberty (corded version), the igniter is right on the top of the catalytic converter held in place with a metal screw. 3) unscrew the screw and carefully pull out the igniter (they r very fragile). you will also have to either desolder the two wires from the control pcb or cut the wires half way. 4) u can test the igniter on the liberty by applying 12vdc to it with 1amp curent limit. DO NOT TOUCH THE IGNITER...IT WILL GET VERY HOT AND GLOW IF IT IS WORKING CORRECTLY. U MAY EMAIL ME AT SNP654@HOTMAIL. COM FOR MORE INSTRUCTIONS INCLUDING THE LIBERTY PLUS. I HAVE REPAIRED AND FIXED MANY MAGNETS. USUALLY IT IS NOT A DAMAGED PART BUT AS SIMPLE AS A THOROUGH CLEANING OF ALL COMPONENTS (LP SOLENOID, THERMISTOR, IGNITOR, CATALYTIC CONVERTER AND CO2 FLOW PORTS)


Is the sun surface hot or cold?

The temperature on the Sun's surface (photosphere) is 6000 degrees Celsius. So, yes, the sun's surface is very hot.


Is Mercuric nitrate an acid?

Mercury is not attacked by dilute hydrochloric or sulfuric acid. It reacts with hot nitric acid to form mercuric nitrate, Hg(No 3 )


What are the 3 features on the suns surface?

hot hot hot


Why does barium hydroxide and ammonium nitrate turn slushy?

Cos hot babes squirts


What is the surface of the sun like?

the surface of the sun is hot


What are the 3 features on or above the Suns surface?

hot hot hot


Where is the ignighter on a kitchen aid gas dryer?

No matter what brand it is, it has to be where the gas valve goes into the manifold. Where the burner tube is, there is either the igniter or hot surface igniter. Just take your model # of the dryer, and either go to the MFG website,or go to a parts store online and put in you model # and you will be able to look at the diagram of your dryer, this way you know exactly where it is. Here is a great place for parts,and also you can look at your diagram. http://www.partselect.com/MultiModels.aspx?ModelNum=KGHS02RMT&searchTerm=&RefineSearch=0


How hot is the surface Venus?

the surface is so HOT it will leave your nipples flat