Usually there is a adjusting bolt an the alternator or steering pump or ac pump, u have to loosen the bolts holding the alternator,2, and then tighten the ajusting bolt, if if got no bolt to adjust then use a prybar to push on alternator as u do the belt will tighten, hold it there and tighten the bolts.
the Serpentine Belt on the 91 Lebaron is on Tension Pulley, you dont tighten it. But if it is loose and you need to tighten it you just go and buy a new belt and put that on.
Tighten it.
Tighten it or replace it.
you cant tighten it because it has an automatic belt tensioner. it costs about 100 dollars and can be done at home if your mechanical
Loosen alternator remove old belt. Reroute new belt, tighten alternator.
You'll notice an idler pulley. One that does nothing more than apply tension on the belt. Loose the front bolt of this slightly, then access the bolt that appears to go into the backside of the pulley and loosen it slightly to reduce tension on the belt. When installation of the belt is complete, tighten down the tensioner bolt till the belt is not overly tight, about 1/4" of spring is good to avoid slippage. Then tighten the lock bolt on the front of the pulley.
The 1989 Toyota Corolla serpentine belt can be tightened or loosen with the tensioner pulley. Pry to the left on the tensioner pulley until the belt is tight. Tighten the tensioner pulley.
how do you tighten fan belt on l200
just in front of the altenator, there is a 10mm bolt, tighten that and it will tighten the fan belt
Loosen the tensioner bolt on your alternator. Slide the alternator to the left. Remove the alternator belt. Put the new alternator belt on and tighten the tensioner bolt.
What belt? Drive belt is easy, just loose the 3 bolts on the alternator, pry the alternator forward, put the new belt on, pry the alternator back, and tighten the bolts. Power steering belt is much more difficult.
To tighten a loose drive belt, find the pully that is connected to the belt. Tighten the pully and then hold the belt in place using the adjuster belt. Check out the related video to see an example of how this is done.