Ther are two bolts for the eccentric on the rear loosen the bolts and turn the eccentric to tighten . Chain should have a quarter inch slack in the middle ( with rider on machine ). When you sit on machine the pivot tightens the chain so dont get it too tight it will break .
Loosen the 2 bolts on back axle.... then turn the center carrier it is what is called a concentric and will tighten chain. BUT don't tighten to much
Loosen the 2 bolts on the rear center section of the rear axle housing 1 on each side and turn the center section it is offset with the axle,
In the rear end of machine there is an eccentric that adjust the chain . There are 2 bolts that loosen the eccentric .Loosen the two bolts , loosen the brake collar, a large pair of channel lock pliers works well . Be carful with the greese zert in the middle , use the channel lock pliers and rotate the eccentric to tighten chain . With the weight of the normal rider sitting on the machine you want an inch to an inch and a half play up and down in the middle after you adjust it . Tighten the bolts down and tighten the brake collar .
A 2001 Chevrolet Trailblazer uses a STP Extended Life Oil Filter
Polaris - Kangta album - was created on 2001-08-19.
When you find out let me know,, i have a 2001 250 trailblazer doing the samething..someone told me it might be compresion also..do you know what the compresion should be ?? Richard Fisher rfisher1169@gmail.com if i find out anything i will let you know as well
Small Business School - 2001 Gary Wall's Oregon Trailblazer Foods was released on: USA: 5 May 2001
498cc
2001 or 2011
132
14.7mm
The 2001 prizm has a timing chain.