The Idle Air Control valve is fastened to the top of the throttle body with 2 bolts that have an 8mm head. Tighten them clockwise.
The idle speed on a 2001 Honda Civic is adjusted through the idle air control valve. The valve is located behind the intake manifold. Open the cover using a screwdriver and tighten the valve to lower the idle.
To adjust the idle on a 2005 Honda Civic locate the idle control valve. The IACV and is found near the intake manifold. Open the top of the valve and tighten it to lower the idle or loosen it to raise it.
The idle speed on a 1996 Honda Civic is adjusted using an IACV. The IACV, or idle air control valve, lowers and raises the idle by either being tighten or loosen.
often the schreader valve inside the valve stem is loose, a special insert wrench is needed to tighten.
The idle air control valve is what is being tightened. If the valve is tighten and the idle is still erratic there is a leak somewhere. Take the IACV out and have it cleaned. Also check the vacuum lines on the car.
If your water softener bypass valve is leaking, you can fix it by checking for loose connections or damaged seals. Tighten any loose connections and replace any damaged seals. If the leak persists, you may need to replace the bypass valve.
The idle is computer controlled and is not adjustable. Althought the computer does make adjustments to the idle, the spring in the idle air valve softens from age causing a higher than desirable idle speed. The idle air valve has a round silicone plug on the center of its exterior. Remove the silicone to expose a plastic 5mm allen screw. Turn it clockwise to tighten the spring which lowers the idle or counterclockwise to raise the idle. If it still idles too fast when at proper operating temp, there is a set screw on the other side of the throttle body that can b adjusted but chances r your problem is all with the idle air valve needing adjustment or replacement.
Your bike tire may be leaking from the valve due to a loose valve core, damaged valve stem, or improper installation of the valve. It is important to check and tighten the valve core, inspect the valve stem for any damage, and ensure the valve is properly installed to prevent further leaking.
The idle air control valve on the Chevy Colorado actually controls the speed of your engine's idle. The valve is sometimes called the idle speed control valve.
The idle control valve works by regulating the idle speed of the engine. The idle speed of the engine is usually controlled by the engine of the computer.
Check your vacuum lines and also check your idle air control valve. Make sure the IAC valve gasket is in good condition and that the valve itself is not loose.
The idle air control valve on a Volvo S80 is located on the intake manifold. The valve controls the rate at which the engine holds an idle.