If the machine has three chains , you need to tighten the center chain first . You want this chain tight with no slack . There is an eccentric at the front of center chain . Loosen the 2 bolts and rotate the eccentric to tighten the chain . With this tight do the front chain . This you want tight also , with no slack . The back chain needs to be tightened with the rider on machine . When you put weight on the rear of machine it tightenes the chain this is why rider needs to be on machine .There is 2 bolts on the rear eccentric that need to be loosened and then you rotate to tighten or loosen . With the rider on machine you want a half to 1 inch play in the center of chain . With no one on machine the chain will look loose but it is not .
how to tighned chain on 1996 400 polairs sportsman
About 35
About 35
55
2 quarts.
29 hp taken from Polaris website. They have there 400 ho Ranger listed as 29hp and it has the same 455cc carb engine as the Sportsman 400 ho
Need the fuse location on a 2003 Polaris Sportsman 400.
with batteries and a knife
200 mph
About 1300 RPM's
2004 polaris sportsman 400 has new starter, battery and selenoid but still won't start what else can it be
Sportsman 400 4x4 94-97 .028 NGKBR8ES