Generally, serpentine belt systems have a spring loaded tensioner pulley in them that don't require adjustment. However if your belt is loose, look for an idler pulley (one that does not drive anything). These will sometimes have an adjustment on them. A word of caution, serpentine belts require a specific tension that, if adjustable, require specialized tools to set them. Too tight and you will wear components driven by the belt prematurely, too loose and there can be problems with a component in the system. If you are a proficient do-it-yourselfer, I would suggest buying a service manual and following the proper procedures outlined in there.
where is the fuel pump relay located on a 2000 toyota corolla
The Parts Needed for 2000 Toyota Corollahttp://www.autosparepartsusa.com/searchparts.aspx?make=76&made=Corolla&year=2000
Where is the fuel injector on a 2000 Toyota Corolla
how much engine coolant dosee a 2000 toyota corolla hold
The 2000 Toyota Corolla uses a timing chain and normally requires no maintenance.
The starter is located on the front of the engine of the 2000 Toyota Corolla. It is placed on top of the transmission housing.
You can do that by replacing the tensioner
The Toyota Corolla.
check this out for the details http://www.usedcarexpert.co.uk/stats/Toyota/Corolla/1997-2000
You do not tighten a serpentine belt. It has a tensioner that keeps it at the correct tension. If it is loose, either the belt is worn and needs replacing or the tensioner is defective.
In the fuel tank
The average cost to paint a 2000 Toyota Corolla will depend on the shop you go to. Most places charge around $1,600, average.
The fuses in a Toyota Corolla 2000 are for various components of the car. For instance, the fuses power the windshield wipers, the radio, the power windows, and the power seats.
yes u can I've done it but i have a high idle issue if the car is in park or neutral.
Begin by loosening the tensioner pulley on your 2000 VW. The serpentine belt will become loose when the tensioner pulley is loose. Remove the old serpentine belt and put the new serpentine belt on. Tighten the new serpentine belt with the tensioner pulley.
Your owners manual will tell you.