get manual from auto parts store will help with many things. one has to remove the crank pulley and timing cover on passanger side of engine. the crank end has a mark on it which should be strait up, and the rocker arm gear has a mark on it which sould be strait up too, at same time. manuals show and explain this.
In middle of crankshaft pulley
where are the camshaft position
It is located on the distributor under the cap and rotor Crank sensor should be on the front bottom of engine by the crank pulley
Should be the pulley just above the crankshaft pulley
You don't
Depending on engine displacement in general remove belt-s then bolt holding pulley to the crankshaft then using a puller remove the pulley, when installing use a installer not a hammer to put the pulley on the crankshaft.
on the Chrysler engine (420a) you do need a puller and installer to deal with the crankshaft dampener pulley.
Where is the crankshaft sensor on daewoo cielo glx 1996 dohc.
no they didnt have them till 1996 with the obd2
Trouble code P1345 means: Camshaft To Crankshaft Position Correlation Fault
check main pulley area bottom by harmonic balance
On any motor, the harmonic balancer is on the front of the crankshaft. It is what the pulley is bolted to.