Want this question answered?
most washer fluid pumps are on the resivour itself
typically a washer pump breaks. Replace it. How to replace a washer pump?
no fluid it is electric asist
Twenty gallons or so.
Mercon ATF
Through the dipstick filler tube
you will have to get to were the fluid resivor is for the washer. it will be located at the bottom of the resivor. all you do is pull on it to relese it from the resivor.then unhook the tube runnin to it and replace with your new pump..
I own a 2001 Tribute and there is no separate rear filler. There is a tube that runs from the windshield washer tank to the rear. I was getting washer fluid dripping in on the passenger side near the top of the windshield pillar. Turns out the hose separated at a coupling. Unscrewed the two screws that hold on the cover to the right side between the dash and near the headliner. Hose was disconnected ice had formed and pushed it apart at one of the joints so the fluid leaked into the car. Cleaned everything up reinserted the hose and been working fine ever since.
Do you mean "how do I replace washer line"? They are just rubber hose from the washer fluid container to the wipers. If you have a leak, you can get a plastic splice and put it in at the split to repair.
You have to remove the washer fluid reservoir and remove the pump from the bottom area of its side.
A sensor light on the dash will come on indicating the car needs new washer fluid. To change the fluid, you open the hood and locate the container with the washer fluid symbol on it. You can unscrew the cap and pour more water in.
its inside the windshield washer fluid tank, you have to remove it to access the pump