answersLogoWhite
Chevy Blazer
Windshields and Wipers
Ford Expedition XLT
Ford F-150

How do you totally remove windshield wipers completely from a 1994 blazer?

252627

Top Answer
User Avatar
Wiki User
2011-09-12 22:37:30
2011-09-12 22:37:30

To remove the wiper arm on 94 Chevy SUV's, first raise the wiper arm so that it is turned to a 90 degree angle from the windshield. The wiper arm should stay there once it is raised. At the base of the wiper arm, note a small piece of metal sticking out. Using a screwdriver, gently pry the piece of metal OUTWARD, from the center of the wiper arm shaft. Once the "keeper" has been removed the wiper arm should lift straight off the shaft.

1

Related Questions

User Avatar

Totally uninstall AVG from your computer can help you completely remove AVG dll files.

User Avatar

You have to completely remove the dash to get access to the heater core.

User Avatar

how do you remove the dashboard of a 2002 Chevy blazer

User Avatar

Remove the windshield wiper arm from the windshield wiper motor. Remove the wiring harness. Remove the retaining nut. Reverse the process to install the new windshield wiper motor.

User Avatar

how to I remove the overhead console on the S 10 Blazer?

User Avatar

you can remove rain-x from a windshield buy using a amonia

User Avatar

remove scratches in winshield

User Avatar

Remove the wiring harness from the back of your Chevy Lumina windshield washer pump. Remove the windshield washer pump fluid hose. Remove the windshield washer pump retaining bolts. Reverse the process to install the new windshield washer pump.

User Avatar

The windshield washer pump is located on the firewall in the engine compartment. Remove the windshield washer pump hose. Remove the wiring harness. Remove the windshield washer pump retaining screws. Reverse the process to install the new windshield washer pump.

User Avatar

How to Remove the Steering wheel From a Chevy Blazer 2001

User Avatar

Remove the wiring harness from your Volvo windshield washer pump. Remove the windshield washer pump fluid hose. Remove the windshield washer pump retaining bolts. Reverse the process to install your new windshield washer pump.

User Avatar

how do you remove a toyota sienna 2000 windshield water reservoir tank.

User Avatar

Remove the wiring harness from the back of your 1993 Mercury Villager windshield washer motor pump. Remove the windshield washer pump hoses. Remove the windshield washer pump retaining bolts. Reverse the process to install your new windshield washer motor pump.

User Avatar

Begin by removing the hose from your windshield washer pump. Remove the windshield washer pump wiring harness. Remove the windshield washer pump retaining bolts. Reverse the process to install your new windshield washer pump.

User Avatar

How do I remove a windshield washer pump from a toyota 4-runner 1988?

User Avatar

cut seals and gently remove

User Avatar

Two screws on either side of the windshield, ( the lower ones on the bracket ) and two more on each roll bar extension where it connects to the windshield, but you will also need to remove the back screws as well to completely remove the roll bar extension. It's just a way to eat bugs if you ask me, but suit yourself, be sure to use the tie downs ( if you still have them ) to keep the windshield from bouncing on the hood.

User Avatar

Remove the 2000 Chevrolet Malibu washer tank supply hose. Remove the windshield washer tank retaining bolts. Reverse the process to install the new windshield washer tank.

User Avatar

2004 Chevy Cavalier windshield washer fluid reservoir retaining bolts. Remove the windshield washer fluid supply tube. The windshield washer fluid reservoir will come free.

User Avatar

The 2000 Chevy Cavalier windshield washer tank is held in place with for retaining bolts. Remove the retaining bolts and the windshield washer tank will come out.

User Avatar

remove dashplate then unbolt radio

User Avatar

To remove the windshield from a Chevy Celebrity: To remove the windshield you will need a special knife to cut thru the "glue' that holds the windshield in place. Remove the weather strip that is around the outside of the window. Take off the windshield wiper arms. Remove the screws and take off the air inlet panel at the base of the windshield. Slide the knife between the glass and the metal frame and cut the "glue" loose around the perimeter of the windshield. Once the "glue" is cut free the windshield should easily be removed. If the windshield is not already broken you stand a good chance of breaking it trying to remove it. I have seen the special knife available for sale at Harbor Freight, I would think there are other stores which also carry it.

User Avatar

Remove the two screws on both mirrors. Remove mirrors. Remove the 2 screws holding the chrome bottom shield. Remove the bottom shield. Loosen screws holding the windshield, and both hex nuts. Windshield should pull straight up and off.

User Avatar

well its prob the same as the 95-96-97 etc......remove the air cleaner hardware, and the windshield washer bottle... after that, you can see the drain cock...lower drivers side


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.