To turbo a 5efhe your best option would be to
Forged roads for a normal 5efe
Forged Piston's for a 4efte
Manifold to suit a 4efte
turbo to suit manifold
Downpipe to suit turbo
Oil sump and oil filter housing off a 4efte
4efte rocker cover and inlet (makes pipework easie)
Use engine loom from a 4efte and ecu from a 4efte
Gearbox and shaft are of the same size the 4efte shafts have bigger cv joints on them..
This is the basic there is loads more you can do for more power etc :) Hope this helps
No, It will only fit Toyota 4efe (starlet), 5efe(paseo), 5efhe(sera). 4afe is a different head.
How do you blow a engine turbo.
No, the turbo is powered by the exhaust and uses no engine power.
yes
a non-turbo engine will not hold up to the turbos you will have to put in hardened internals
The 1.8 turbo is more powerfull. The turbo charger pushes more air and fuel into the engine.
no...they are different...it wont fit the block of a non turbo 4d56 engine...
2jzgte (Turbo) or 2jzge (Non Turbo) vvti engine
Well, the turbo charged car has a turbo hooked up to the engine. What a turbo basically does is to force feed the engine with more air + fuel, making it possible to get more power out of a smaller engine.
no, you have to fit a turbo box to a turbo engine, a 1.9el box will not fit a 1.9 turbo engine, it has to be a turbo box to engine, notting else will fit, hope tis helps
Your bearings are dieing, the turbo is done and you should replace it because a smoking turbo can ruin your engine because some parts of the turbo can be blow'd into the cylinders and your engine is toasted.
You can put a Turbo on your 1992 engine. You will need to purchase a air intake Turbo modification kit.