0
You buy the correct crankshaft, rods, and pistons and install them in your block.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Can you make a ford motor into a 383 stroker?
If you wanted to put a 3.75" stroker crankshaft with a with a 0.05" offset grind into a Ford engine with a 4" bore (such as a Windsor 351) you could make a 383ci Ford stroker. But as for making the traditional Chevy stroker engine, you can't turn a Ford engine into a Chevy engine.
How do tell four bolt main from two bolt main?
To tell if your engine is a 2 bolt main or a 4 bolt main. Turn the engine upside down on an engine stand. Next, count the number of bolts on each main bearing cap. if there are two, then its a 2 bolt main. And if there are4, then its a 4 bolt main. This applies to the three center caps. The front and rear are always 2 bolt.
What direction does the bolt turn to loosen the fan clutch on a Chevy pickup?
lefty losey....righty tighty (so turn it left)
How do you adjust the parking brake on a 2001 Chevy Cavalier?
The 2001 Chevy Cavalier parking brake has an adjustment bolt on the parking brake assembly. Turn the adjustment bolt to loosen or tighten the parking brake.
What direction do you turn the bolt on the crankshaft pulley on a 2005 Chevy Suburban?
Righty tighty, lefty loosey.
Why is your 2002 Chevy trailblazer it makes like a squeak when you turn to the right?
Beacuse the bolt on the tires are loose/..
How do you Change timing on 94 Chevy 1500 with a V6 4.3L?
That requires a timing light, you loosen a bolt on the distributor and turn it a little until the marks on the main pulley match a notch that you aim the timing light at.
How do you crank up the torsion bars on a 1995 Chevy z71 1500?
the is a bolt right behind the transmisson that you turn
How do you rotate the flywheel on a 1989 Chevy Suburban?
There is a big bolt that is inside of the bottom pulley on the front of the engine, It is the bolt that holds the balancer on . Get a socket that fits that bolt and then turn the engine with that and that will rotate the fly-wheel.
Which way to turn the crankshaft bolt on a 97 Honda civic?
The crankshaft spins counter-clockwise on a 1997 Honda. To remove the bolt for the main pulley spin the bolt clockwise.
Could you turn a 2 bolt main into a 4 bolt main?
yes with link provided it is explained that with machining it can be done but you need to check with the shop if they can machine the block to accept the splayed or angled bolts
Which way do you turn the fan clutch bolt connected to water pump to loosen it on a 2000 Chevy s 10?
It turns to the left.
