You need to change your oil then turn the key so your electrical will come on but do not start the truck. Once you have done this pump the gas petal 3 times kind of quick(if you do it too quick or too slow it will not reset). Once you do this you should hear a series of chimes or dings, once this stops you change oil message should go away.
put some oil in it ?
Turn ignition to auxillary pump gas pedal three times turn ignition off then back on light should be reset. also if you call jiffy lube and tell them they did not reset light they will give you process to reset.
There is no 1995 Chevrolet Colorado. The Colorado was not produced until 2004.
Change the oil........then turn the key to the on position,with car off pump gas pedal 3 times within 5 seconds. This should reset light
If it's the "change oil" light, turn the ignition to on, but don't start it, and tap the gas pedal 3 times.
I have a 04 Colorado its easy..... put the key in run and push the GAS IN 3 TIMES and its fixed!!
Turn the key to the on position but do not start. Press gas pedal to the floor and release 3 times. It will now reset.
turn the key to the ON position but do not start it. next fully depress the gas pedal three times in a row and wait about 10 seconds. after that your finished
The oil capacity of it if you're just draining the oil and changing the filter is 5.75 quarts.
2005 Chevrolet Truck Colorado 4WD (2.8L MFI DOHC): - 5 Quarts 2005 Chevrolet Truck Colorado 2WD 3.5L MFI DOHC - 6 Quarts 2005 Chevrolet Truck Colorado 4WD 3.5L MFI DOHC - 6 Quarts 05 Chevrolet Truck Colorado 2WD 2.8L MFI DOHC - 5 Quarts
Turn the key to the run position and depress the accelerator 3 times to the floor within 5 seconds. The light should blink and then go out.jd
Yes, it can turn the light on for the wrong oil.