change ur brake pads?
Low brake fluid.
...I have the exact same problem with my 1993 corolla.......Brake System warning light and discharge warning light
There is a sensor in the top of the brake cylinder where you put in the fluid. Replace it and the light will go away.
somtimes float sticks down in brake master
the only way you change brake pad or disc
There is an electircal switch that 'senses' when the emergency brake lever is applied and lights a warning light on the dashboard to keep you from driving in this condition. This switch may be faulty or out of adjustment, causing the warning light on the dashboard to turn on.
ck all outside lights, brake,tail, turn and cyclopse(middle brake lite)
change the fuse if not replace flasher
You need to find and fix the problem. Either your emergency brake is not completely off or you have a problem in your cars brake system. That warning light is there to warn you that a serious problem exists.
If the parking brake / emergency brake is on , or if the BRAKE FLUID LEVEL in your brake master cylinder in the engine compartment is LOW , and probably before you start the engine when you turn your ignition key to the RUN position just to make sure the bulb for the warning light works
After replacing pads and sensors, turn the ignition key on and leave on for approximately 2 minutes. This resets the brake pad wear warning light.
We have just bought a Polo with this light on the door. It is a warning that car is safely locked. If you turn lock twice when shutting the door it goes off but car is still locked securely.