It would be helpful to know the year of the vehicle, but generally, under the hood you will find PDC (power distribution center, aka, fuse box). Depending on the year of the vehicle, remove the cover and look under the cover, you will find a schematic of the fuses. One will be labeled "DRL". Remove this fuse.
You can also push the dome override button on and off a few times until you hear a ding. However, you have to do this every time you start your truck.
yes , by removing DRL
how so you turn on the daytime running lights on a 99 suburban
push in the e brake pedal 1 click
No. Daytime running light can be disabled without affecting turn signals.
You don't they have daytime running lights (they are on when the car is on).
Because the car is equipped with daytime running lights
If the Explorer is running engaging the parking brake is supposed to turn the daytime running lights off , otherwise the daytime running lights are supposed to shut off when the engine is shut off . I have a 2004, Eddie Bauer Explorer. On the light switch itself, there is a selection to turn on or off the day lights, as well as the extended, courtesy lights after ignition is turned off.
Turn headlight switch to the left to turn off daytime runnig lights. Turn switch back to left to turn back on.
Go to www.trailvoy.com A member there sells a DRL killer that works great! You can't!!!
I take it you have daytime running lights , if so by engaging the emergency / parking brake the daytime running lights should go off
turn the key to acc. put the parking brake on 1 click and then start it the lights shouldn't come onAnswerPull the fuse to it.
Start the van and see if the lights turn on automatically.