Want this question answered?
reset switch by Honda or acura part number 07paz-oo10100
Press and hold the select AND reset buttons at the same time. Turn ignition switch to on and wait maybe 10 seconds until the maintenance light goes out.
press the reset and select switch at same, turn ign. key to II (On) and wait 10 seconds
The maintenance required light only goes on after 7,500 miles since last 'maintenance'. The maintence required light will not turn off by replacing or changing anything, the only way to turn it off is by putting your key in the key slot next to the light.
put the key in and turn one time then hold the select button and the one below it at the same time and turn the key a second time
put the key in and turn one time then hold the select button and the one below it at the same time and turn the key a second time
All you have to do is turn the key in the ignition to "power on" (without starting the car) while holding the "reset" and "select" buttons on the instrument panel. Hold for several seconds. the next time you start the car, the maintenance require light will be gone.
HOW TO TURN OFF THE MAINTENANCE LIGHT ON 2002 HONDA ACCOURD
To reset "MAINTENANCE REQUIRED" light, turn ignition off, press and hold the SELECT and RESET buttons. Turn ignition and hold buttons for 10 seconds until the indicator resets. works on 2003 mdx for sure.
It means that there is some sort of maintenance required - you'd need to pull codes to determine exactly what. Performing the required maintenance successfully should shut the light off.
What year ?
There is a small square button underneath the dash just to the right of the steering collumn. With the key in the ignition, in the off position, press the button for 7-10 seconds, then turn the key to ACC. This should reset the maintenance required light. It is a gimmick to get you to take your vehicle to the dealership so they make money off of you for resetting it.