you need to plug it out
once you flip close the microphone, the headset is turned off
hit s.source on remote turn on personel
plug it in to the sistim and take it off and turn it on
The Plantronics Voyager 855 bluetooth pairing passkey is 0000. The pairing procedure is as follows: 1. Turn ON the bluetooth feature on your phone. 2. Turn the headset off by pressing and holding the call control button until the indicator turns red and then turns off. 3. Turn the headset back on by pressing and holding the call control button until the indicator flashes red/blue. The headset remains in pairing mode for 3 minutes. 4. Use the commands on your phone to locate the headset. 5. When prompted for the passkey, enter 0000. When pairing is successful, the indicator on your headset turns off. Your headset is now connected and ready to use.
If your headset does not turn on and it's wireless, than you should check your batteries. If your headset doesn't turn on and it's wired, than you may have faulty wiring, or a misaligned head-jack. And if that isn't the case. You probably have faulty internals.
buy a headset and turn it on
Turn off your phone charge it all night. Do the same to your Bluetooth headphone. Now after you are sure that both the devices are fully charged, go ahead and turn on your Phone. Make sure the headset is still off (folded in and bluelight not blinking). In your Phone set go to the Bluetooth connection (in my Motorola L6 it was in Menu>Settings>connection>bluetooth>handsfree) Now press the talk button on the Headset for about 5 seconds. The ring will turn purple. This is the "Find Me" mode of the headset. Now in your phone, click "look for devices." Your phone will find the Headset. Do a "Select" and it will probably ask for a password. put in "0000" it should then successfully connect and also save the connection.
The headset is a set of bearings that allows the fork to turn smoothly in the head tube of the frame w/o sticking wobbling around when you turn the handle bars.
You will need to adjust the headband on your headset to avoid slippage.
yes all you have to do is hold in the silver button on the outside of the headset if you just press it it will go on mute p.s. are you mentally stable why couldn't you turn it off p.s.s. you are a dummy
phone rings but can't get to answer
To reset the Motorola H710 Bluetooth headset, simply turn the headset off. Then, hold the on button down for about 10 seconds until the blue light quits blinking. The headset is now ready to be paired with any Bluetooth capable device.