im not sure of the correct way but i did it on my escalade when you push the e brake the lights go off what i did was was up at the top of the e brake there is a switch i took it off but the only thing with that is the brake light stays on in the dash or like i said at the top just push the e brake in one notch hope that helps
Near your headlamp switch you should have a dome over ride button. push that button 4 times in a row and your head lights should go off. do the same to turn them back on or when you shut it off and restart they will automatically come back on.
The 2000 Olds Bravada uses Dextron iv automatic transmission fluid. The fluid is specific and other types should not be substituted.
The Fuel Tank Pressure Sensor on a Oldsmobile Bravada 2000 is on the top of the Fuel Pump Assembly.
r134a
5w30
1999 GMC Jimmy Envoy 2001 Chevy Impala 2001 Ford Escape 2003 Mercury Grand Marquis 2002 Oldsmobile Bravada 1996 Oldsmobile Bravada 2000 Chevy Venture 1994 Kawasaki Vulcan 1500
It is under the car behind the tranny
I believe it's 18 gallons.
It is a body on frame design. https://www.gmpartsdirect.com/auto-parts/2000/oldsmobile/bravada/base-trim/4-3l-v6-gas-engine/body-cat/frame-and-components-scat
it is located inside the intake manifold
try replacingthe rad cap it worked on mine
There should be 2 plastic or metal pieces behind the headlights if you pull up on the lip of them they should release the headlights, then change your bulbs and set them back in the front of the car and replace the holders. They are long and thin and have holes with open space above the hole to hold them in place.
The speed sensor on a 2000 Olds Bravada Smartrak is on the top of the automatic transfer case. To change it you need to disconnect the two wires and replace with a new sensor.