On the Alero, open the drivers door and remove the fuse panel cover. Turn the ignition key on without starting the engine. Press the red reset button in the fuse panel once, the change oil light will flash, press and hold the reset button until you hear a chime. Done
With the car off, turn the key to the run position. Press the gas pedal to the floor 3 times . The car will chime and the Change Oil light will turn off.
Change the oil........then turn the key to the on position,with car off pump gas pedal 3 times within 5 seconds. This should reset light
How do you turn off the change oil light on a Chevysilverado 2002
Yes (During the holiday, you can't turn on a light, turn off a light, turn on a car, turn off a car etc. But during The intermediate days, you can.)
To turn off "change oil" light: # Turn off car. # Turn key to "on"; do not start it, just turn to "on" position. # Firmly depress accelerator three times, pausing for a second after each pump. # After 3 to 5 seconds, "change oil" light will flash and then turn off. # must depress gas pedal 3 times inside of 5 seconds, should hear a chime and the light will reset. This is found in the owners manual
The oil change light on your car will not go off until you get an oil change. If you have and it still hasn't gone away, you may need to go back to your mechanic.
It can be quite simple to change the car interior light bulbs. A person has to Turn off the power of the car, Remove the lens, and the bulb, clean the fixture,and install the new bulb and lens.
Warning lights come on when there is an issue. A Oil change light with turn off when an oil change has taken place.
To reset the change oil light is very simple, 1. First, turn the key to the on/run position but do not start the car, you will see all your normal dash lights on. 2. press the gas peddle (3) three times, the light will go off. Turn off key, then turn back on and start vehicle, light should be off and reset, if not repeat the steps above.
You change the oil.
Turn car off, key to RUN, not start. Press gas three times to floor quickly. Light goes off.
Turn car on but don't start the engin. Pump breaks a couple times. Turn Key to off then start engin all the way. Light should be off.