Pull turn signal lever?
Hi beam lights only the High brightness filament of the headlight.Lo beam lights only the Low brightness filament of the headlight.DRL lights only the High brightness filament of the headlight, but at reduced current.Do you see the pattern?
had that prblem, its your wireing hornis
possibley blown high beam light
Bulbs blew
The answer is in your question,Fog lights are just that, lights that can be switched on in the fog,Driving lights are lights used to assist the driver when thay need more light (when full beam is selected).Answerive got the same model & the fog lights are switched on using full beam...i just wired in my own 12v feed & attached a switch ;)
The 1999 Chevrolet has a separate fuse for the low beam headlights. The low beam headlight fuse, can be found in the fuse box.
yes my brother has done it on several Chevy vehicles with that style head lights
Check the grounds for the headlights.
High-beam lights are your sencondary head lights in any veicle. They can usually be turned on with the same botton you use to turn your head lights on. High beam lights are use to see farther and wider in dark areas.
High-beam lights are your sencondary head lights in any veicle. They can usually be turned on with the same botton you use to turn your head lights on. High beam lights are use to see farther and wider in dark areas.
The only experience I have from adding fog lights to a friend's car, is that the fog lights hook into the headlight low beam circuit. This is done so that the fog lights can only be used with low beams and there is no power to them on high beam.
if your low beam lights run off a relay, then that might have expired. will need replacing if it has.