how do you turn on high beams on 1979 corvette
There is a foot switch on the driver's floor by your left foot.
Your headlights turn off when you turn the high beams on because you have a defective switch. You need to have a mechanic replace the high beams switch. It is a simple replacement.
turn signal lever. pull toward the driver to change from high to low. or low to high
You need to turn your high beams down and ,after the car passes, you may turn them back to high beams
== ==
== == more than likely your dimmer switch is bad,hope that will help
Take your car in to have it checked. Turn signals should work without high beams.
Should be like any other vehicle. (pull turn signal stick back (high beams on), pull it back again (high beams off).
Pull back on the turn signal lever to change from high beams to low beams If the turn signal lever is pushed forward the high beams stay on and if the turn signal lever is pulled back all the way that is the " flash to pass " feature
It's possible that when you turn your blinker on you are inadvertently pushing the lever forward causing your high beams to come on and stay on.
high beams!
they had to use ropes