0
Press your odometer button (black stem sticking out from below your MPH gauge. Press it in and you should get your trip meter. Press and hold it in and it will reset. Then drive safely. Any time you want to look at your mileage or trip meter just push button once. to reset press and hold. Enjoy
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you reset the maintenance required light on a Toyota Tacoma 2012?
Page 425 owners manual.set trip meter to A,turn off ignition,while holding trip meter turn on ignition,wait for 00000 on trip meter, done.
How do you turn off airbag on Camry 2009?
A person can turn off the airbag in a 2009 Camry by holding down the trip meter until the light turns off. The trip meter is found on the dashboard.
How do you turn off the maintenance light after you change the oil on a 2004 Solara?
Step 1 Turn the key to the 'on' position. Step 2 Reset both trip meters to zero. you can reset the trip meters to zero by selecting trip A or trip B and holding in the trip meter button for five (5) seconds. Step 3 After both trip meters are reset, select any trip meter and hold in the trip meter button and start the car. Step 4 Continue holding the trip meter button until the "maintenance required' light disappears. Have Fun, King Geoff
How can you reset the 2008 Tundra Maintenance Light?
While holding the "A" trip meter button down, turn the ign switch to "on" ( not start). Hold the trip button down and watch the trip meter count down from - - - - - , - - - - , - - - , - - , - . That's it.
How do you reset the language on Chevy Colorado?
Press the trip/odometer button until the language option comes up, while holding in the button turn it clockwise until the language you want comes up then release.
How do you reset the 'maintenance required' light on an '04 Toyota Rav 4?
How do I turn off the Flashing Maintenance light (oil change reminder)? 1. Turn the power switch IG-ON and make sure that the ODO/TRIP meter is the odometer display. 2. Turn the power switch OFF. 3. While pushing the "ODO/ TRIP meter switching & TRIP meter reset" switch, turn the power switch IG-ON. 4. Until the resetting is completed, the reminder light flashes. 5. The resetting is completed when the reminder light turns OFF. Release the "ODO/TRIP meter switching & TRIP meter reset" switch. 6. After the resetting is completed, the ODO/TRIP meter displays as a set of zeros for 1 second. Then, the ODO/TRIP meter displays the your normal odometer mileage. This really works - keep holding the button down until the lights go out!
How do you turn on the fog lights in the 2008 chevy colorado?
Turning on the fog light on a 2008 Chevy Colorado is easy. The fog light switch is located near the steering wheel.
How do you turn off the maintenance required light on an 2008 Toyota Camry?
While holding the trip meter reset button in, turn the key to the on position. You don't have to crank the engine. You will see a line go across the trip meter display, this will reset your maintenance required light. Actually, you need to place the trip meter in the "Trip A" position and then either turn the key or push the "Start/Stop" button to the accessory position (without starting the engine) and you will see five rectangles appear and then disappear one-by-one to reset the oil change mileage sensor. In older Toyota models, the trip meter had to be placed in the "odometer" position before turning the key or "start/stop" button to the accessory position. Now, the trip meter has to be in the "Trip A" position.
How do you reset the service light on a Volvo S40?
Turn ignition key to the 1st position, and then push and hold the trip meter reset stem, then, while continuing to hold the trip meter pushed in, and after no more than 2 seconds, turn the ignition key to the 2nd position and continue to hold the trip meter reset pushed in until the service light begins flashing. Once it begins flashing, you can release the trip meter. You may also get an audible signal when complete.
How do you reset the service light on the s40?
Turn ignition key to the 1st position, and then push and hold the trip meter reset stem, then, while continuing to hold the trip meter pushed in, and after no more than 2 seconds, turn the ignition key to the 2nd position and continue to hold the trip meter reset pushed in until the service light begins flashing. Once it begins flashing, you can release the trip meter. You may also get an audible signal when complete.
How do you reset maint req light on a 2005 Scion TC?
step 1 turn the key to the 'on' position. using the trip meter button, toggle the lcd until 'ODO' is displayed. step 2 turn the key off. now, push and hold the trip meter button. while holding the trip meter button, turn the key to 'on'. step 3 while you continue to hold the trip meter button, you will see on the lcd disply five (5) small dashes and they will begin to 'count down' rather quickly. step 4 continue holding the trip meter button and once all the dashes have been cleared, your lcd will display six zeros (000000) - release the trip meter button now - and then the lcd will display 'ODO' and your current mileage. at this time, your 'maintenance required'/oil change light has been reset.
How do you turn off the maintenance required light on a 2008 Honda odyssey?
I think: * hold down the trip meter * then insert car key into ignition key hole (while still holding down the trip meter) * start the engine (while still holding down the trip meter) * continue to hole down the trip meter for another 10 seconds this is it. If it doesn't work this time, re-try later
