Try connecting compressed air line to the fuel line and blow back to the tank.
try disconnecting all the lines and blow it all out yourself use a long wire to get threw the tanks valve undue your filter and just clean it out completely takes about 15 minutes if you know what your doing
If you see two oil lines going to your oil furnace, most likely one is a supply line and the other is the return line to the oil tank. When it is necessary to lift oil to the burner, a return line should be connected between the fuel pump and tank. This requires insertion of the bypass plug into the fuel pump.
Furnace oil is the source of fuel used by the heating system to create a consistent warmth when required.
The oil that is burned by furnaces is mostly #1 or #2 fuel oil
It would depend on the type of burner in your oil furnace and the type of jet fuel. I recommend that you contact the manufacturer of your furnace first.
Fuel oil and diesel fuel are similar, but they are not the same thing. Each has its own ASTM standards. Check with your heating oil supplier. If you don't trust his opinion, check with the manufacturer of your furnace. Those are the two groups of experts.
no
Petroleum Is a fossil fuel
The kerosene is a lighter oil. I think you would get more BTUs out of the heating oil. Just make sure that you are using the right fuel for the furnace that you have. Most now days would take heating oil.
In general, yes. But they've put big taxes on diesel. I have also converted an #2 oil furnace to reliably burn the motor oil from our van fleet
you would convert it buy using specific gravity. the specific gravity of fuel oil is 0.893 at 60F. so that said 1 liter of furnace oil would weigh 893g. one metric tonne of furnace oil would equal roughly 1120 liters
92%
How can you covert an oil furnace to an electric furnace