Here is another option. Get two flat head screwdrivers and a coat hanger. Slide one screwdriver between the metal door frame and the rubber weather stripping and pull back on the screwdriver to make a gap between the two. Then insert the other screwdriver into the gap and do the same. This should give you enough space to slide the coat hanger into the car and use it to push on the unlock button on the door panel. It takes a little work but can be done if you can keep the door from closing on the hanger.
Use you key to open the lock.
Open trunk... access from behind panels. Wes
There is a side compartment on the left of your steering wheel.Open it up & push the button in there.Should open the trunk
Open your hood and pull the body clips out of the front black panel. After doing so you should be able to remove it with a socket wrench and then just disconnect the wires.
Open Cobalt was created in 2009.
call a locksmith
use your key in the trunk lid. you can also pull back seat down and open latch from inside.
check either end of the dash when you open the doors the fuse panel doors are the pull type
There are 2 releases hidden under the ledge of trunk while open!!
you need 1.25'' wrench to open because this thing is plastic you need extra care to open
Doors Open was created in 2008.
I had this problem with my doors a couple years back. Because the doors are so heavy, they sag as the car ages. You should take it to a mechanic and have them bring the doors back up to their original place.