You don't.
does the front wiper fluid work so its just the wiper fluid in the back that doesnt work if thats the case it might be a hose thats disconected the washer pump is shared with the front and back fluid its located on the washer fluid container at the bottom just check your hoses to make sure they are still connected i might not be explaining it right but hope this helps
need windshield washer motor
It probably has water damage, and now does not work. It is dead now.
because thats how some thing work, nothing to do about it
Any brand washer fluid will work.
Strap locks work by means of a washer. A washer is placed in the narrow, tapered end of the strap button. The wide, outside tapered end of the strap then prevents the washer from slipping, as it is screwed tight.
no
There is a pump motor in the bottom of the washer bottle that pushes the fluid. Check to see if it might be dead.
So you can work out where there may have been damage to the vehicle thats been filled with car body filler.
Does the washer not work at all, or does it just not work when it's trying to rinse? It may be a lid switch. If the washer does not work at all, it may be the timer. Pull the timer from the unit and check to see if any of the "fingers" are stuck, sticking, or burnt. If so, change it. The timer is the "Brains" of the washer... it tells it when to start, cycle, & stop. Sounds to me like this is more than likely your problem. The washer allowed water to be drawn in and then went to "L".
Could be anything at fault. Unplug the compressor and try using your washer. If it works, then you have a fault with your compressor. If it still doesn't work, do what should have been done in the first place: call an electrician.
cuz your stupid