0
What else can I help you with?
How do you know if you have a warped head after it blew a head gasket?
The head will need to be inspected at a machine shop. They can tell you if it is warped or cracked.
What effect will a cooling system failure have on a running engine?
Nothing good, I can tell you that. Anything from a warped head, cracked head, warped block, cracked block, and basicly, a blown engine.
How do you tell if your head is cracked or your head gasket?
The only way to tell for sure is to remove the head and look. You are going to have to remove the head in either case. Remove the head and take it to a machine shop and have it inspected for cracks and to see if it is warped.
Does a motor have to be overheated in order to have a warpped head?
That is the most typical thing to cause a warped head. A warped head is a severe diagnoses and not the first thing that would come to mind for a problem. Don't know what the issue is but if you have a problem that has lead to you think you have a warped head and you haven't had a extreme over heat of the motor I will bet you don't have warped head.
What are signs of a warped head?
leaks
Why is there oil in your?
you have a warped/or cracked head,or blown head gasket
Would it be better to replace a head gasket or put in a recon engine on a y reg fiesta zetec?
Bit of a tricky one ... It all depends on the condition of the cylinder head. If the cylinder head is warped then replacing the head gasket won't solve your problem. A warped cylinder head can be skimmed (if not too badly warped). If the cylinder head is badly warped then it would be much easier to replace the head than fit another engine.
Why is oil in your radiator?
you have a warped/or cracked head,or blown head gasket
Why is there oil in your radiator?
you have a warped/or cracked head,or blown head gasket
Will a truck start with a warped head?
Not likely
Do you shave the head when changing a head gasket?
It actually is called milling the head its to ensure that the head is flat and true so that you get a good seal when mating it back to the block. You do not have the mill the head unless it is warped. Have it checked at a machine shop and they will tell you if it needs milling.
What causes Water in pistons Mazda 323?
A cracked/warped head, Blown head gasket, cracked cylinder wall, or cracked/warped intake manifold.
