0
DHCP V6 works on SARR process where:-
S=SOLICIT message using multicast
A=Advertise message form sever side
R=Request
R=Reply
because ipv6 does not support broadcast.
VIMAL KUMAR SINGH
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Why is ipv6 not available?
IPV6 is relatively new and doesn't work everywhere yet.
Does IPv6 work on Linux?
Yes. The Linux kernel has supported the IPv6 protocol since 1996.
How can active directory work without DHCP?
Active directory and DHCP are not the same services; they are intended to do different things. DHCP manages IP addressing and AD manages accounts, groups, users, etc. They don't need to work together.
Will the cisco 7940 work with IPv6?
As long as you get an IOS version that supports v6.
How do you upgrade IPv4 to IPv6?
You don't exactly "upgrade" it; you can configure your computer for IPv6, but continue using IPv4 for a while. Not many servers exist yet for IPv6; if you want to access an IPv4 server, you need to use IPv4 on your side, as well. To use IPv6 on your end, you need to access a server that also works with IPv6.So, basically, you need to:Ask your ISP (Internet Service Provider) whether they have support for IPv6.Ask the ISP how you should configure your computer to work with IPv6. (I am not sure whether there is a standard method that works in most cases - perhaps you just enable it.)Configure your computer.Look around for Web sites that use IPv6. For a start, I believe there is an ipv6.google.com, which you can use for testing your connectivity.You don't exactly "upgrade" it; you can configure your computer for IPv6, but continue using IPv4 for a while. Not many servers exist yet for IPv6; if you want to access an IPv4 server, you need to use IPv4 on your side, as well. To use IPv6 on your end, you need to access a server that also works with IPv6.So, basically, you need to:Ask your ISP (Internet Service Provider) whether they have support for IPv6.Ask the ISP how you should configure your computer to work with IPv6. (I am not sure whether there is a standard method that works in most cases - perhaps you just enable it.)Configure your computer.Look around for Web sites that use IPv6. For a start, I believe there is an ipv6.google.com, which you can use for testing your connectivity.You don't exactly "upgrade" it; you can configure your computer for IPv6, but continue using IPv4 for a while. Not many servers exist yet for IPv6; if you want to access an IPv4 server, you need to use IPv4 on your side, as well. To use IPv6 on your end, you need to access a server that also works with IPv6.So, basically, you need to:Ask your ISP (Internet Service Provider) whether they have support for IPv6.Ask the ISP how you should configure your computer to work with IPv6. (I am not sure whether there is a standard method that works in most cases - perhaps you just enable it.)Configure your computer.Look around for Web sites that use IPv6. For a start, I believe there is an ipv6.google.com, which you can use for testing your connectivity.You don't exactly "upgrade" it; you can configure your computer for IPv6, but continue using IPv4 for a while. Not many servers exist yet for IPv6; if you want to access an IPv4 server, you need to use IPv4 on your side, as well. To use IPv6 on your end, you need to access a server that also works with IPv6.So, basically, you need to:Ask your ISP (Internet Service Provider) whether they have support for IPv6.Ask the ISP how you should configure your computer to work with IPv6. (I am not sure whether there is a standard method that works in most cases - perhaps you just enable it.)Configure your computer.Look around for Web sites that use IPv6. For a start, I believe there is an ipv6.google.com, which you can use for testing your connectivity.
How can DNS distinguish between an IP version 4 and IPv6 host in determining which resource record to return?
Windows Embedded CE resolves host names into IPv6 addresses via queries to a DNS or WINS server, or via IPv6 link local multicast. Queries sent to DNS servers are performed over IPv6 and IPv4. Queries sent to WINS servers are performed over IPv4 even though they may return IPv6 addresses. To use a host name as an alias for an IPv6 address, you must ensure that the name is unique and that it resolves to the correct IPv6 address. For IPv6 name-to-address entries, the IPv6 address is written by using standard colon-hexadecimal format. For more information, see IPv6 Addresses. When using the getaddrinfo function, dual stack name resolution occurs. Domain names are resolved by sending DNS name queries to a configured DNS server. This is a computer that either stores domain name-to-IPv6 address mapping records or has records of other DNS servers. The DNS name resolution may yield both IPv4 and IPv6 addresses. The DNS server resolves the queried domain name to an IPv4 or IPv6 address and returns the results. When configured for DHCP, the DHCP server provides IPv4 addresses of DNS and WINS servers used for both A and AAAA searches. The DNS client in Windows CE .NET 4.1 and later also supports the processing of AAAA (quad-A) resource records. The Internet Protocol (TCP/IP)must be configured with the IPv4 address of a DNS server. The Host name is resolved to an address by a DNS, WINS, or Link Local Multicast Name Resolution (LLMNR) resolver
What are the uses of ipv6 for commercial?
what is the commercial use of ipv6?
What is the length in bits of a logical IP address IPv4 and IPv6?
32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).
What ports are used by dhcp and the DHCP client?
The port 67 and port 68 are used by DHCP and the DHCP clients.
Does Windows XP support IPv6?
Short answer - yes.You need to be running Service Pack 1 at a minimum.Service Pack 2 has an even more complete IPv6 stack.To enable IPv6 on XP, open a command prompt window and type:C:\> ipv6 /?Did you then see this result?:C:\> ipv6 /?Could not access IPv6 protocol stack - the stack is not installed.To install, please use 'ipv6 install'.If you did get the above result, simply type:C:\> ipv6 installIt will take a few seconds, and then your Windows XP system will be fully IPv6 enabled.
Does the dhcp server have to be activated to issue leases to dhcp clients?
dhcp has to be authorized
What is the use of a DHCP relay agent?
The use of a DHCP relay agent is an agent that relays DHCP between DHCP clients and DHCP servers on different IP networks. The DHCP relay agent is compliant with RFC 1542.
