it works by heating the 2 metal strip of metal and then you put the acrylic on them then wait for 2mins then take the acrylic carefully off then start bending it into your favorite shape
At strip clubs.
A bimetallic strip is two different metals glued together. When the temperature changes each metal expands (or contracts) but by different amounts, so the strip as a whole ends up bending. This bending property can be used to turn on (or off) a heater switch.
it doesnt work, it breaks it doesnt work, it breaks it doesnt work, it breaks
"A bimetallic strip is made of two different metals stacked in a thin strip. Because different metals expand at different rates, one of the metals expands more than the other when the strip gets hot. This makes the strip coil and uncoil in response to changes in temperature=As the room temperature drops below the desired level, the bimetallic strip coils more tightly, and the glass tube tilts. A drop of mercury closes an electric circuit that turns the heater on. As the room temperature rises above the desired level, the bimetallic strip uncoils slightly, becoming larger. The drop of mercury rolls back in the tube, opening the electric circuit and the heater turns off."==Quote from Holt, Rinehart, and Winston Physical Science Textbook=
strip club
It is an electric heater, with the heating elements in a straight line (a strip)
A mains lead is the power cable for the strip heater. The mains lead is single-insulated.
bending acrylic
how to use a strip heater is simplez dont burn yourself and keep your hands away from the hot metal bar so its simplez compare the meerkats.com
Restaurant and bar supply retailers would be a possible place that you could purchase a hot strip heater. Web restaurant store has their own website which would be your best bet for purchasing a hot strip heater.
A strip heater
Say you have water travelling through tubes, and you wish to heat that water as it goes... Attaching a strip heater around that tube would enable you to regulate the temperature of the water passing through.
does the bypass valve on elution heater be open or closed
A Hot Wire Strip Heater
over 100 degrees c so don't touch it.
First remove the dashboard to access the heater box and core! Then reversal of strip down to rebuild.
Divide 25,000 by the supply voltage to get the current.