How to install a boost gauge in a acura integra?"
A boost gauge in an internal combustion engine has the role of a pressure gauge. The gauge indicates the manifold's air pressure or a turbocharger or supercharger's boost pressure.
Yes, the easiest way to hook up is to cut the vacum line about 3 inches before the map sensor. use a rubber vacume "T" adaptor reconect your original line to the strait poetion and your boost gauge to the leftover.
One can purchase a boost meter or gauge from Jegs and Glow Shift Direct. These meters can also be bought at Treadstone Performance, Egauges and Sunmit Racing.
do boost work in ga
either because your not running enough boost or your a moron
First step check fuel pressure with gauge at rail. Boost may work when you turn key but pump may be out.
boost pressure, as you call it, will not show on gauge,if you have one, while engine is at idle the turbo pressure does not boost but runs all the time according to the revs of engine
why doesn't my rpm gauge and temp gauge, fuel gauge not work
Boost is positive pressure in the manifold, so you only see boost when you give the gas pedal heavy load. The best way to check the boost pressure is to connect a vacuum hose to a boost gauge. This will tell you the exact boost pressure when you are in wide open throttle.
Vacuum, I believe. Correct me if I'm wrong, anybody.
Easiest way is to get a Manual Boost controller. Something like a GFB MBC (Manual Boost controller) is a very easy way to raise the boost. (Google GFB) A Boost gauge is also mandatory if you raise the boost...otherwise you might turn it up to much and destroy the engine!