It has to do with a type of force called torque. When you push down on a lever, the force you push with is multiplied by the length of the lever to produce a torque. If you have a very long lever, then you are multiplying your pushing force by a big number and can produce a big torque. It's an easy way to get a large force with little effort.
The mechanical advantage of a lever can be increased by moving the fulcrum towards the load and away from the power end.
From the design of the lever (on paper), the mechanical advantage is effort arm/load arm which means Distance from pivot to the applied force/distance from pivot to the load The result of that is that the forces will have the reciprocal ratio, and the input force to the lever will be the output force/the Mechanical Advantage .
One.
Move the focal point of the leaver.
The mechanical advantage of the machine is"if you give small accelration , it will increase the speed of the engine... It is possible by mechanical
The mechanical advantage of a lever can be increased by moving the fulcrum towards the load and away from the power end.
Mechanical advantage .
Effort Arm
an aid used to increase or decrease the mechanical advantage of a lever
Mechanical advantage refers to the ratio of the force produced by a machine to the force applied to it. A lever with a mechanical advantage greater than one is used to increase distance.
increase distance.
A lever with a mechanical advantage greater than one is used to increase distance. A lever is a simple machine connected to ground by a hinge called a fulcrum.
The mechanical advantage is when the fulcrum is closer to the effort and creates a advantage
increase the effort arm to 8 feet
The mechanical advantage of the lever is that smaller persons can move heavier objects. The lever can be placed under the object and the person can then push down on the lever.
Move the fulcrum (pivot) farther from the effort and closer to the load.
Crowbar (lever) .